Tag: blacktown driving test

Posted on

NSW Log Book 7. Reversing

NSW Log Book 7. Reversing

Learning Goal.
Safely reverse the vehicle

Learning Content.

Observation when reversing, including:
Blindspots and vision block outs.
Using the mirrors and looking through the rear window.

Speed control when reversing

Steering control when reversing

Selecting reverse gear

Three point turns

Use of reversing aids if fitted to the vehicle when reversing.

Facts and Tips.
Many pedestrian crashes involve children being hit by a reversing vehicle. Many of these could be prevented by taking a little extra care with speed and observation when reversing

Turning your head and looking out the back window can help your sense of direction.

Driving lesson questions call Cameron 0438 364 244

Posted on

NSW Log Book 6. Scanning


NSW Log Book 6. Scanning


Learning Goal
Use your eyes to scan the driving environment for important information and hazards.

Learning Content

Scanning the driving environment including:
Distance. Look as far ahead as possible. Turn head to see as far as possible in curves.

Surface. Scan road surface for road markings as well as hazards such as pot holes or debris.

Sides. Look for road signs, entering traffic, pedestrians and other hazards. Scan beyond the edges of the road.

Mirrors. Regularly check following traffic movement

Instruments. Check vehicle instruments, especially speed, using eye movement only with minimum attention diverted from the road.

Facts and Tips
The driving environment changes rapidly. Avoid looking at any single object for too long.
Slow down if vision is limited, for example on a crest or curve.

Driving lesson questions call Cameron 0438 364 244

Posted on

NSW Log Book 5. Changing gears

NSW Log Book 5. Changing gears

Learning Goal.
Change gears smoothly and efficiently to suit road conditions, speed and vehicle requirements

Learning Content.

Position and use of gear lever

Coordination of clutch, accelerator and gear lever

Changing up and down gears according to speed

Braking and changing down gears to prepare for a corner

Selecting gears in an automatic vehicle

Facts and Tips
Gear changing, like steering, is primarily a physical skill that requires judgement, timing, technique and coordination. Improvement only comes from practice.
Plenty of practice now will make future learning easier.

A common mistake is to rush when changing gears when learning.
Pausing for a moment in neutral can help make gear changes smoother.

Selecting first {L} or second {S} gear in an automatic vehicle will help reduce the load on the brakes on long downhill sections.

Remember to check the mirrors before slowing down.

Driving lesson questions call Cameron 0438 364 244

Posted on

NSW Log Book 4. Steering

NSW Log Book 4. Steering

Learning Goal.
Use a smooth effective method of steering

Learning Content.

Hand over hand method of steering

Pull/Push method of steering

Hand position on the steering wheel

Look in the direction of turn to see hazards earlier

Facts and Tips
Pull/Push steering { sometimes called shuffling } can be used for all turns and manoeuvres
Hand over hand steering is an effective method for manoeuvres and tight turns
Correct hand position improves control and reduces fatigue.

Driving lesson questions call Cameron 0438 364 244

Posted on

NSW Log Book 3. Moving off and stopping.

NSW Log Book 3. Moving off and stopping

Learning Goal.
Move the vehicle from and return to the kerb.

Learning Content.

Adjusting and securing seatbelts

Starting up and shutting down the engine safely

Selecting gear for moving off

Coordination of clutch and accelerator

Use mirrors before moving off and braking

Use of signals for leaving and returning to the kerb

Check blindspots before leaving, or returning to the kerb

Choosing a safe gap to move from the kerb

Use of two stage braking ” Set up and Squeeze”

Use of park brake to secure the vehicle when stationary, or when moving off uphill.

Facts and Tips.
You must signal for five seconds before leaving the kerb.
Correct braking is done in two stages, first put light pressure on the brake peddle and pause {set up the brakes} then progressively apply the necessary braking pressure.
Two stage braking {set up and squeeze} improves braking effectiveness. reduces the likelihood of skidding and provides better control.
When stopping at a stop line you must stop completely before reaching the line, and as close as possible to the line.

Posted on

NSW Log Book 2. Vehicle controls

NSW Log Book 2. Vehicle controls

Learning Goal.
Locate and understand the function of controls, gauges and warning lights

Learning Content.
Foot controls: accelerator, brake and clutch

Gear lever and gear positions

Park brake

Steering wheel

Signals and lights

Ignition switch and steering lock

Windscreen wipers and washers

Mirror adjustments and blindspots

Gauges and warning lights

Door locks and windows

Boot, bonnet and fuel cap release

Facts and Tips
Relevant information about your vehicle’s controls can be found in your owner’s manual.
Learn to use your windscreen wipers now rather than waiting until you get caught in the rain.
If you are unfamiliar with any control, do not attempt to learn how to use it when you are driving, pull over and learn to use it without taking your attention from the road.

vehicle gauges
vehicle gauges

Driving lesson questions call Cameron 0438 364 244.

Posted on

NSW Log Book 1. Preparing to drive.

NSW Log Book 1. Preparing to drive

Learning Goal.
Make all the required adjustments to enable safe, comfortable and effective control of the vehicle.

Learning Content.

Location and operation of seat adjustments

Location and operation of steering column adjustments

Adjust driver’s seat position for comfort, safetly and good accessibility to controls

Correct fastening and adjustment of seatbelt

Adjust rear view mirrors

Identify vehicle blind spots

Facts and Tips
A good driving position promotes effective car control and helps reduce driver fatigue.
Correct adjustment of the seatbelt reduces the risk of injury in a crash.

driving position
driving position

Driving Lesson Questions – call Cameron 0438 364 244

Posted on

Traffic lights – When turning right at traffic lights.

When turning right at traffic lights:
When turning right at traffic lights:

Traffic lights When turning right at traffic lights:

Enter the intersection as shown in the diagram, unless a sign indicates otherwise
or there is a red right turn arrow displayed.

Wait until oncoming traffic clears or breaks and then turn safely.

If the lights change to yellow or red while you are in the middle of the intersection, you are allowed to turn right.
You must turn as soon as it is safe to do so. Be sure your front wheels and car are straight and not blocking the oncoming traffic.